KitchenAid appliance repairs in The Colony, TX
KitchenAid built-in wall ovens, dishwashers, and refrigerators show up often in The Colony's newer and remodeled kitchens, known for their precision engineering and glass touch controls. Our technicians know the parts specific to KitchenAid's major appliances and carry them on the truck.
KitchenAid issues we see most often
Here's what tends to go wrong on each type of KitchenAid appliance, and the service page to visit for the full breakdown and cost guide.
| Appliance | Most common failure | Full repair guide |
|---|---|---|
| Wall oven | Glass touch pad failures and oven temperature sensor (RTD) faults on double wall oven models. | Oven & range repair |
| Dishwasher | Drain pump clogs and door latch failures, similar to other Whirlpool-family brands. | Dishwasher repair |
| Refrigerator | Built-in and counter-depth models sharing platforms with Whirlpool — see our Whirlpool repair page. | Whirlpool repair |
| Cooktop | Induction and electric cooktop element and touch control failures. | Cooktop repair |
| Range hood | Motor and fan switch issues on higher-CFM premium ventilation models. | Range hood repair |
Built-in appliances need a different kind of repair visit
KitchenAid's wall ovens and cabinet-depth refrigerators are usually installed flush into custom cabinetry, which makes access and cabinet protection part of the job, not just the repair itself. Our technicians know how to work around built-in installations without damaging surrounding trim or panels.
- Wall ovens often need panel removal for full internal access
- Custom-panel refrigerators require extra care around cabinet-matched doors
- Double wall ovens involve two separate control systems, not one
- We treat surrounding cabinetry and trim as carefully as the appliance itself
Common KitchenAid wall oven error codes
If your KitchenAid wall oven's display is showing a code in the F# E# format, here's a quick reference for what it usually means.
| Code | What it usually means |
|---|---|
| F1-E3 | Wiring harness cavity size mismatch — usually needs the wiring harness inspected. |
| F2-E0 / F2-E1 | Touch pad or keypad connection issue — often a loose or damaged cable. |
| F3-E | Oven temperature sensor (RTD) fault — the sensor typically needs replacing. |
| F5-E | Door switch mismatch — the door and control board don't agree on whether it's latched. |
| F7-E1 | Common switch wire issue between the latch switch and door switch. |
A power cycle sometimes clears these temporarily, but if the code returns, the specific part identified usually needs replacing.
How we repair your KitchenAid appliance
Here's what happens from your first call to a working appliance again.
Get your model number
We ask for the model number when you call so we can bring the right parts on the first visit.
Diagnose & quote
We confirm the exact cause, including reading any error codes, before quoting a flat-rate price.
Repair with OEM parts
We use original manufacturer parts whenever available for your model.
Test & confirm
We run a full cycle or test and confirm the error code is cleared before we call it done.
Every service, for every KitchenAid appliance
From wall ovens to range hoods, see the full list of repairs we handle.
View all 12 servicesRelated brands
KitchenAid is part of Whirlpool Corporation, sharing parts with these brands.
View all 12 brandsKitchenAid repair questions
What homeowners in The Colony most often ask before booking a KitchenAid repair.
What does an F3 code mean on my KitchenAid wall oven?+
F3 codes point to the oven temperature sensor, called an RTD. This is the component that tells the oven when it's reached the set temperature, and it typically needs to be replaced when this code appears.
My KitchenAid oven's touch pad isn't responding — what's wrong?+
This usually shows up as an F2 code and points to a loose or damaged connection between the touch pad and the control board. It's a common issue on glass touch-control models after several years of use.
How much does KitchenAid appliance repairs cost?+
Most repairs run similarly to other major brands, typically $100 to $500 depending on the part, plus the standard service call fee. Built-in wall ovens can run slightly higher due to the extra time needed for panel removal.
Do you repair KitchenAid stand mixers?+
No — we focus on major kitchen appliances like ovens, cooktops, dishwashers, and refrigerators. For a stand mixer or other small countertop appliance, KitchenAid's own service network is the better option.
Do you use genuine KitchenAid parts?+
We use OEM parts whenever they're available for your model, sourced through standard appliance parts distributors, and will tell you upfront if a repair calls for anything different.
Is KitchenAid part of the Whirlpool family?+
Yes. KitchenAid is owned by Whirlpool Corporation and shares some control boards and platforms with Whirlpool and Maytag models, particularly in dishwashers and refrigerators.
KitchenAid appliance showing an error code? Let's fix it today.
Call now for a same-day or next-day appointment with a local technician.