A burner that clicks but won't light, heats unevenly, or a glass surface that's cracked can turn cooking dinner into a hassle — or a safety concern. Our technicians work on gas, electric, and induction cooktops and carry the parts to fix most issues the same day.
Whether it's gas, electric, or induction, most cooktop problems come down to one of a few common causes.
The most common gas cooktop complaint — usually a dirty or worn igniter.
A failing element, clogged burner ports, or a worn switch can all cause inconsistent heating.
A safety hazard from day one — see the note below before using the cooktop again.
Digital touch panels can fail from wear, moisture, or a control board issue.
A safety issue that needs immediate attention — see the gas safety guidance below.
Stuck on high or won't respond to the dial usually points to the burner switch or valve.
Here's what usually causes each cooktop problem we see in The Colony, and the typical price range once your technician confirms the exact issue.
| Likely cause | What it means | Typical repair cost* |
|---|---|---|
| Weak or dead igniter (gas) | Produces the spark that lights the burner — the most common gas cooktop failure. | $100 – $200 |
| Failed surface element or coil (electric) | Heats the cooking surface directly beneath your pan. | $95 – $250 |
| Faulty burner or infinite switch | Controls the heat level for an individual burner. | $100 – $250 |
| Cracked glass cooktop surface | A safety hazard that requires replacing the surface, not a patch repair. | $250 – $600 |
| Failed control board | Manages touch controls and power distribution across the cooktop. | $250 – $600 |
*Ranges reflect typical parts-and-labor costs across the industry. Your technician confirms the exact price on-site before starting any repair.
A cracked ceramic glass surface can't be safely repaired — it carries a real risk of electrical shock and shouldn't be used again until replaced. If you smell gas instead, turn off the burner, ventilate the kitchen, and if the smell is strong or won't clear, leave the home and call your gas utility.
Here's what happens from your first call to cooking again.
We check the igniter, elements, switches, and control board to find the actual cause.
You get a flat-rate price for the repair before any parts are touched.
Most parts are stocked on the truck, so the fix usually happens the same visit.
We confirm each burner ignites and heats correctly before we call it done.
We regularly service Whirlpool, GE, Samsung, LG, Bosch, and Frigidaire cooktops found throughout The Colony.
If your built-in oven or range hood needs attention too, we can often handle it in one visit.
View all servicesWhat homeowners in The Colony most often ask before booking a cooktop repair.
A dirty or weak igniter is the most common cause on gas cooktops. Clogged burner ports from food debris can also produce a weak or uneven flame even when the igniter is working fine.
Most repairs run between $95 and $600 depending on the part, plus the standard $60–$95 service call fee. A cracked glass surface or control board sits at the higher end.
No. A cracked ceramic glass top can't be safely repaired and carries a real risk of electrical shock. Stop using that burner and have the surface assessed as soon as possible.
This is often warped cookware rather than the cooktop itself. If every pan heats unevenly on the same burner, the element, coil, or switch is the more likely cause.
Turn off the burner, ventilate the kitchen, and if the smell is strong or doesn't clear, leave the home and call your gas utility. See our full oven and range gas safety guidance for complete steps.
A new cooktop typically costs $400 to $2,000 installed, so most element, switch, or igniter repairs are clearly cheaper. A shattered glass top or control board on a cooktop over about 12 years old is when replacement becomes worth comparing.
Call now for a same-day or next-day appointment with a local technician.