Dryer repair in The Colony, TX
A dryer that runs cold, takes three cycles to finish a load, or smells like it's burning isn't something to leave for later. Our technicians track down the exact part causing the problem and carry the parts to fix most dryers the same day.
Signs your dryer needs a repair
A dryer usually gives off a few warning signs before it stops working completely. Here's what tells us it's time to call a technician.
No heat
Clothes coming out cold and damp is the most common dryer complaint, usually tied to the heating element or a blown fuse.
Drum won't turn
Clothes sitting still instead of tumbling usually means a broken belt or a motor issue.
Takes multiple cycles to dry
If a load that used to take 45 minutes now takes 75 or more, airflow is likely restricted somewhere.
Loud thumping or squealing
These noises during a cycle usually point to worn drum rollers, bearings, or a slipping belt.
Burning smell
This can mean lint buildup or an electrical issue and should be checked right away for safety.
Won't start or door won't latch
A bad door switch, start switch, or control board can keep the dryer from running at all.
Common causes and what repairs typically cost
Here's what usually causes each dryer problem we see in The Colony, and the typical price range once your technician confirms the exact issue.
| Likely cause | What it means | Typical repair cost* |
|---|---|---|
| Clogged lint vent | Restricted airflow forces longer dry times and can lead to overheating. | $80 – $180 |
| Broken heating element | Heats the air that dries your clothes — one of the most common dryer failures. | $130 – $250 |
| Blown thermal fuse or bad thermostat | Safety components that shut off heat when the dryer runs too hot. | $100 – $230 |
| Worn drive belt | Connects the motor to the drum — a common reason the drum stops turning. | $100 – $200 |
| Worn drum rollers or bearings | Support the spinning drum and are a frequent source of thumping noise. | $100 – $200 |
| Failed control board | The circuit board that manages power to the dryer's components. | $250 – $500 |
*Ranges reflect typical parts-and-labor costs across the industry. Your technician confirms the exact price on-site before starting any repair.
A burning smell means stop and call us
Lint is highly flammable, and a clogged vent combined with a failing thermostat is one of the leading causes of home dryer fires. If you notice a burning smell, unplug the dryer and don't run it again until a technician has checked it.
- Under 8 years old with one failed part — usually worth repairing
- Most common causes stay well under the 50% replacement threshold
- Control board failure on an older unit is the main exception
- Not sure? Our technician gives you an honest recommendation on-site
How we repair your dryer
Here's what happens from your first call to a working dryer again.
Inspect & diagnose
We check the heating element, vent, belt, and thermostat to find the actual cause.
Quote before we start
You get a flat-rate price for the repair before any parts are touched.
Repair on the spot
Most parts are stocked on the truck, so the fix usually happens the same visit.
Test a full dry cycle
We run a complete cycle to confirm proper heat, airflow, and drum rotation.
Brands we repair
We regularly service Whirlpool, Samsung, LG, GE, Maytag, and Kenmore dryers found throughout The Colony.
Related services
Booking a washer repair at the same time often means one visit covers your whole laundry room.
View all servicesDryer repair questions
What homeowners in The Colony most often ask before booking a dryer repair.
Why is my dryer not heating?+
The most common causes are a broken heating element, a blown thermal fuse, or a faulty thermostat. A clogged vent can also cause the dryer to run cool by restricting airflow.
How much does dryer repair cost?+
Most dryer repairs run between $80 and $500 depending on the part, plus the standard $60–$95 service call fee. We confirm the exact price on-site before doing any work.
Why does my dryer take more than one cycle to dry a load?+
This almost always points to restricted airflow from a clogged lint vent, though a failing thermostat can also be the cause. Clearing the vent is one of the cheaper fixes, so it's worth checking first.
Is a burning smell from my dryer dangerous?+
Yes. A burning smell combined with a clogged vent is one of the leading causes of home dryer fires. Unplug the dryer and avoid using it until a technician has inspected it.
Is it worth repairing an older dryer?+
For most common issues like a heating element, fuse, or belt, repair costs stay well under half the price of a new dryer, so repairing is usually the better value on machines under about 8 years old.
How long does a dryer repair take?+
Most repairs are completed in one visit, typically within an hour or two, since our trucks carry the parts for the most common dryer failures.
Dryer running cold or noisy? Let's fix that today.
Call now for a same-day or next-day appointment with a local technician.